- 0755-21675213
- acdrive@micno.com.cn
Transformadores especiales de alambre de doble frecuencia de la serie ke300a - 10, máquinas automáticas de control numérico especiales, comparadas con los sistemas tradicionales de control de transmisión de tractores,El diseño de la función de respuesta rápida de la máquina de alambre de púas elimina el método de control que antes necesitaba conectarse con el controlador externo de PID, permite el seguimiento automático y el ajuste rápido de la velocidad de extracción de los rollos en función de los cambios del diámetro de la rueda, y es coherente.La parte de la aplicación se basa en las características de la aplicación de la máquina de alambre de púas, añadiendo algunas de sus funciones especiales (por ejemplo, supresión de la corriente eléctrica, supresión del voltaje, supresión de movimientos, etc.).El usuario no necesita hacer demasiadas configuraciones complejas para utilizarlo.Basta con modificar los parámetros en función del lugar en que se utilicen efectivamente.
utiliza un procesador digital de alta velocidad (DSP) fabricado por Texas Instruments Corporation.Asegurar que el sistema tenga un rendimiento de alta velocidad y estabilidad.Puede manejar completamente las operaciones de control más complejas.1.234.567.890 (2) la nueva tecnología de control vectorial sin pg de 1.234.567.890 (2) permite interrumpir el movimiento sin el control vector con pg, con un desplazamiento nominal de hasta el 150% en un momento de 0,5 Hz; ayuda a reducir la sensibilidad a los parámetros eléctricos y a mejorar la adaptación sobre el terreno.También puede aplicarse a los controles de circunvalación, que es la solución perfecta para múltiples motores remolcando la misma carga.1.234.567.890 (3) características de la excavadora 1.234.567.890 (4) tiempo de respuesta dinámica bajo el control del vector pg de 1.234.567.890 (5) función de límite rápido 1.234.567.890 (6) capacidad de reconocimiento preciso de parámetros 1.234.567.890 (7) gran precisión de control de torsión
Item | Technical Index | Specification |
Input | Input voltage | 1AC 220V±15%,3AC 380V±15% |
Input frequency | 47~63Hz | |
Output | Output voltage | 0～rated input voltage |
Output frequency | V/f control: 0~3000Hz Sensorless vector control: 0~300Hz | |
Operation command mode | Keypad control Terminal control Serial communication control | |
Frequency setting mode | Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combined & switched in various modes. | |
Overload capacity | G model: 150% 60s, 180% 10s, 200% 3s P model: 120% 60s, 150% 10s, 180% 3s | |
Starting torque | 0.5Hz/150% (SVC); 1Hz/150% (V/f) | |
Speed adjustment range | 1:100 (SVC), 1:50 (V/f) | |
Carrier frequency | 1.0-16.0kHz，automatically adjusted according to temperature and load characteristics | |
Frequency accuracy | Digital setting: 0.01HzAnalog setting: maximum frequency * 0.05% | |
Torque boost | Automatically torque boost; manually torque boost: 0.1%~30.0% | |
V/f curve | Three types: linear, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square) | |
Acceleration/decele ration mode | Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.1s~3600.0s | |
DC braking | DC braking when starting and stopping DC braking frequency: 0.0Hz~maximum frequency, braking time: 0.0s~100.0s | |
Jog operation | Jog operation frequency: 0.0Hz~maximum frequency Jog acceleration/deceleration time: 0.1s~3600.0s | |
Simple PLC & multi-step speed operation | It can realize a maximum of 16 segments speed running via the built-in PLC or control terminal. | |
Built-in PID | Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.) | |
Automatic voltage regulation | Keep output voltage constant automatically when input voltage fluctuating | |
Control Function | Common DC bus | Common DC bus for several inverters, energy balanced automatically |
Torque control | Torque control without PG | |
Torque limit | “Rooter” characteristics, limit the torque automatically and prevent frequent over-current tripping during the running process | |
Wobble frequency control | Multiple triangular-wave frequency control, special for textile | |
Timing/length/counting control | Timing/length/counting control function | |
Over-voltage & over-current stall control | Limit current & voltage automatically during the running process, prevent frequent over-current & over-voltage tripping | |
Fault protection function | Up to 30 fault protections including over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running status during failure & has fault automatic reset function | |
Input/output terminals | Input terminals | Programmable DI: 7 on-off inputs, 1 high-speed pulse input 2 programmable AI: AI1: 0～10V or 0/4～20mA A12: 0～10V or 0/4～20mA |
Output terminals | 1 programmable open collector output: 1 analog output (open collector output or high-speed pulse output) 2 relay output 2 analog output: 0/4~20mA or 0~10V | |
Communication terminals | Offer RS485 communication interface, support MODBUS-RTU communication protocol | |
Human machine interface | LED display | Display frequency setting, output frequency, output voltage, output current, etc. |
Multifunction key | QUICK/JOG key, can be used as multifunction key | |
Environment | Ambient temperature | -10℃～40℃, derated 4% when the temperature rise by every 1℃(40℃～50℃). |
Humidity | 90%RH or less (non-condensing) | |
Altitude | ≤1000M: output rated power, ＞1000M: output derated | |
Storage temperatu (1) DSP high-speed control core The control core adopts the high-speed digital processor DSP produced by TI (Texas Instruments). Ensure the system has strong performance with high speed and stability features. It can completely deal with the most complex control operations. (2) New No PG vector control technology No PG vector control can block the motion, the rated torque can up to 150% when it is 0.5Hz ; It can help to reduce the sensitivity to motor parameters and improve the adaptability at the site. It also can be applied to winding control, That's a perfect solution for multiple motors drag the same load. (3) Characteristics of "excavator" (4) Fast dynamic response The dynamic response time under PG vector control is less than 20ms. (5) Fast current limiting function (6) Accurate parameter identification ability (7) High torque control accuracy re | -20℃～60℃ | |
Storage environment | Indoor, no direct sunlight, dust, corrosive gas, flammable gas, oil mist, steam, dripping water, salt, vibration |
Inverter Model | Motor | Rated Input Current (A) | Rated Output Current (A) | |
KW | HP | |||
1AC 220V/230V/240V -15%~15% | ||||
KE300A-10-0R4G-S2 | 0.4 | 0.5 | 5.4 | 2.3 |
KE300A-10-0R7G-S2 | 0.75 | 1.0 | 8.2 | 4.0 |
KE300A-10-1R5G-S2 | 1.5 | 2.0 | 14.0 | 7.0 |
KE300A-10-2R2G-S2 | 2.2 | 3.0 | 23.0 | 9.6 |
KE300A-10-004G-S2 | 4.0 | 5.2 | 25.0 | 15.0 |
KE300A-10-5R5G-S2 | 5.5 | 7.2 | 38.0 | 23.0 |
KE300A-10-7R5G-S2 | 7.5 | 10.0 | 50.0 | 32.0 |
3AC 380V/400V/415V -15%~15% | ||||
KE300A-10-0R7G/1R5P-T4 | 0.75/1.5 | 1/2 | 3.4/5.0 | 2.1/3.8 |
KE300A-10-1R5G/2R2P-T4 | 1.5/2.2 | 2/3 | 5.0/6.8 | 3.8/6 |
KE300A-10-2R2G/004P-T4 | 2.2/4.0 | 3/5 | 6.8/10 | 6/9 |
KE300A-10-004G/5R5P-T4 | 4.0/5.5 | 5/7.5 | 10/15 | 9/13 |
KE300A-10-5R5G/7R5P-T4 | 5.5/7.5 | 7.5/10 | 15/20 | 13/17 |
KE300A-10-7R5G/011P-T4 | 7.5/11 | 10/15 | 20/26 | 17/25 |
KE300A-10-011G/015P-T4 | 11/15 | 15/20 | 26/35 | 25/32 |
KE300A-10-015G/018P-T4 | 15/18.5 | 20/25 | 35/38 | 32/37 |
KE300A-10-018G/022P-T4 | 18.5/22 | 25/30 | 38/46 | 37/45 |
KE300A-10-022G/030P-T4 | 22/30 | 30/40 | 46/62 | 45/60 |
KE300A-10-030G/037P-T4 | 30/37 | 40/50 | 62/76 | 60/75 |
KE300A-10-037G/045P-T4 | 37/45 | 50/60 | 76/90 | 75/90 |
KE300A-10-045G/055P-T4 | 45/55 | 60/75 | 92/113 | 90/110 |
KE300A-10-055G/075P-T4 | 55/75 | 75/100 | 112/157 | 110/150 |
KE300A-10-075G/090P-T4 | 75/90 | 100/125 | 157/180 | 150/176 |
KE300A-10-090G/110P-T4 | 90/110 | 125/150 | 180/214 | 176/210 |
RELATED_PRODUCTS
Ke300d - 03 - 01 solar bomba default control box
New Energy Power Plant Electric Energy Quality Solutions
Transformadores de voltaje medio ke300a - XX - T6 (690v)
Tarjeta OC pg
Controlador de servidor
Transformadores especiales para la serie ke300a - 02
Transformadores antirretrovíricos híbridos (baja tensión de batería)
Serie ke300a - 12, 220 a 380, transformadores especiales.
LEAVE_MSG
English 
français 
Español 
русский 
português 
العربية 
tiếng việt 
ไทย 
中文
Productos 
Aplicación 
Maquinaria de Ingeniería
Maquinaria textil
Empresas News 